High-Load Titanium Drilling Using an Accurate Robotic Machining System - Inria - Institut national de recherche en sciences et technologies du numérique Accéder directement au contenu
Communication Dans Un Congrès Année : 2021

High-Load Titanium Drilling Using an Accurate Robotic Machining System

Robert Brownbill
  • Fonction : Auteur
  • PersonId : 1122640
Philip Silk
  • Fonction : Auteur
  • PersonId : 1122661
Peter Whiteside
  • Fonction : Auteur
  • PersonId : 1122662
Windo Hutabarat
  • Fonction : Auteur
  • PersonId : 1122663
Harry Burroughes
  • Fonction : Auteur
  • PersonId : 1122664

Résumé

Robotic drilling systems have been used in the manufacture of large aerospace components for a number of years. Systems have been developed by several systems integrators in order to accurately drill materials from CFRP to Titanium. These systems, however, have been unable to achieve large diameter holes in Titanium due to reduced structural stiffness and end effector capabilities. Typically, large holes are either drilled using large cartesian CNC-controlled machines or drilled using automated drilling units (ADU). However, there is a pull from aerospace OEMS to move away from large monolithic machines, in favour of flexible robotic system. Flexible robotic systems provide a number of benefits for large structure assembly. The following report primarily outlines drilling trials conducted on the Accurate Robotic Machining System, during which holes from 25 mm to 32 mm ID were drilled in titanium implementing an empirical test schedule. Additionally, a discussion on the benefits of drilling large diameter holes using flexible robotic platforms.
Fichier principal
Vignette du fichier
509926_1_En_10_Chapter.pdf (558.32 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03520395 , version 1 (11-01-2022)

Licence

Paternité

Identifiants

Citer

Robert Brownbill, Philip Silk, Peter Whiteside, Windo Hutabarat, Harry Burroughes. High-Load Titanium Drilling Using an Accurate Robotic Machining System. 9th International Precision Assembly Seminar (IPAS), Dec 2020, Held virtually, Unknown Region. pp.140-152, ⟨10.1007/978-3-030-72632-4_10⟩. ⟨hal-03520395⟩
28 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More