SHM for RC Structure Using PZT Rebar Active Sensing System - Numerical Study - Inria - Institut national de recherche en sciences et technologies du numérique Accéder directement au contenu
Communication Dans Un Congrès Année : 2014

SHM for RC Structure Using PZT Rebar Active Sensing System - Numerical Study

Résumé

An active sensing diagnostic system using PZT for SHM of reinforced concrete structure has been currently under the investigation. The system consists of steel reinforcement bar (rebar) and PZTs bonded on the rebar surface. Test results show that the system can detect damages of the structure. To fundamentally understand the damage algorithm and therefore to establish a robust diagnostic mechanism, an accurate Finite Element Analysis (FEA) for the system has been performed. Reinforced concrete structure with a PZT bonded rebar is also simulated and analyzed with commercial FEA software. Simulation analysis is further made for concrete structure with different debonding damage sizes, and the results are validated with test ones. A series of signal optimization have been done through simulated parametric studies. Improvement of PZT installation has been discussed and the relationship between improvement and signal output has been established. By increasing both sizes of PZT actuators and sensors, the output signals increase linearly with PZT size and by several times.
Fichier principal
Vignette du fichier
0088.pdf (978.03 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01020430 , version 1 (08-07-2014)

Identifiants

  • HAL Id : hal-01020430 , version 1

Citer

Fan Wu, Wanjun Li, Juan Yi. SHM for RC Structure Using PZT Rebar Active Sensing System - Numerical Study. EWSHM - 7th European Workshop on Structural Health Monitoring, IFFSTTAR, Inria, Université de Nantes, Jul 2014, Nantes, France. ⟨hal-01020430⟩
153 Consultations
199 Téléchargements

Partager

Gmail Facebook X LinkedIn More