Finite Element Analysis and Design Improvement of Film Picking Forks Roller Tooth in Field Cleaning Machine - Inria - Institut national de recherche en sciences et technologies du numérique Accéder directement au contenu
Communication Dans Un Congrès Année : 2012

Finite Element Analysis and Design Improvement of Film Picking Forks Roller Tooth in Field Cleaning Machine

Xufeng Wang
  • Fonction : Auteur
  • PersonId : 988354
Yonghua Sun
  • Fonction : Auteur
Shaohui Ma
  • Fonction : Auteur
Wei Wang
  • Fonction : Auteur
Jungang Wang
  • Fonction : Auteur
Xuejun Zhang
  • Fonction : Auteur
  • PersonId : 988355

Résumé

In this paper the mechanical analysis of the film picking forks roller tooth in field -cleaning machine was done. A finite element analysis model was built and used by the non-linear finite element analysis method. It is obtained from the result of post-processing calculation and analysis that according to the Fourth Strength Theory, the maximum equivalent stress on the pole tooth root under the uniform load. Root strength should be strengthened to ensure the evenly stress overall the pole tooth, because pole tooth root department would be deformed easily. And the largest stress is at the end of pole tooth and decreases gradually from end to root, and deformation is also the same. Based on the analysis of strength and rigidity, the bearing forces and deformation of the film picking forks roller tooth in work were predicted and validated. It was found that the finite element analysis and the result of test were well coincided. The reliable tool was provided for the design of the film picking forks roller tooth by the finite element analysis. The Roller tooth was designed and improved according to the requirement of deformation and operation.
Fichier principal
Vignette du fichier
978-3-642-27275-2_58_Chapter.pdf (4 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01361179 , version 1 (06-09-2016)

Licence

Paternité

Identifiants

Citer

Xufeng Wang, Yonghua Sun, Shaohui Ma, Wei Wang, Jungang Wang, et al.. Finite Element Analysis and Design Improvement of Film Picking Forks Roller Tooth in Field Cleaning Machine. 5th Computer and Computing Technologies in Agriculture (CCTA), Oct 2011, Beijing, China. pp.519-526, ⟨10.1007/978-3-642-27275-2_58⟩. ⟨hal-01361179⟩
244 Consultations
75 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More