PLC as the Main Controller for Additive Manufacturing Machines - Inria - Institut national de recherche en sciences et technologies du numérique Accéder directement au contenu
Communication Dans Un Congrès Année : 2022

PLC as the Main Controller for Additive Manufacturing Machines

Résumé

Additive manufacturing (AM) is the process of manufacturing a physical object, layer by layer, from a 3D digital model. Despite the advantages of using this technology, its adoption, especially by users with fewer resources, is still limited by the high cost of machines, raw materials, and the complexity of the process. To make this technology more accessible, increasing the cost-effectiveness of the machines, this work analyzes the feasibility of using a single programmable logic controller (PLC) as the main controller of an additive manufacturing machine, as an alternative to the CNC and PLC structure used in most of the applications of this type. Through a PLC programming structure, it was possible to load an instruction file in G code generated by a market slicer program, convert it into axis position commands, and verify that the deposition trajectory was executed.
Fichier principal
Vignette du fichier
528070_1_En_20_Chapter.pdf (509.36 Ko) Télécharger le fichier
Origine : Accord explicite pour ce dépôt
Licence : CC BY - Paternité

Dates et versions

hal-04308397 , version 1 (27-11-2023)

Licence

Paternité

Identifiants

Citer

Marcosiris Oliveira Pessoa, Gerson Silva, Paulo Eigi Miyagi, Ahmad Barari, Marcos Tsuzuki. PLC as the Main Controller for Additive Manufacturing Machines. 13th Doctoral Conference on Computing, Electrical and Industrial Systems (DoCEIS), Jun 2022, Caparica, Portugal. pp.217-224, ⟨10.1007/978-3-031-07520-9_20⟩. ⟨hal-04308397⟩
19 Consultations
7 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More