3D Nanofabric: Layout Challenges and Solutions for Ultra-scaled Logic Designs - Inria - Institut national de recherche en sciences et technologies du numérique Accéder directement au contenu
Communication Dans Un Congrès Année : 2021

3D Nanofabric: Layout Challenges and Solutions for Ultra-scaled Logic Designs

Résumé

In the past few years, novel fabrication schemes such as parallel and monolithic 3D integration have been proposed to keep sustaining the need for more cost-efficient integrated circuits. By stacking several devices, wafers, or dies, the footprint, delay, and power can be decreased compared to traditional 2D implementations. While parallel 3D does not enable very fine-grained vertical connections, monolithic 3D currently only offers a limited number of transistor tiers due to the high cost of the additional masks and processing steps, limiting the benefits of using the third dimension. This book chapter introduces an innovative planar circuit netlist and layout approach, enabling a new 3D integration flow called 3D Nanofabric. The flow, consisting of N identical vertical tiers, is aimed at single instruction multiple data processor Arithmetic Logic Units (ALUs). By using a single metal routing layer for each vertical tier, the process flow is significantly simplified since multiple vertical layers can potentially be patterned at once, similar to the 3D NAND flash process. In our study, we thoroughly investigate the layout constraints arising from the Nanofabric flow and the non-crossing planar graph constraint and propose several techniques to overcome them. We then show that by stacking 32 layers to build a 32-bit ALU, the footprint is reduced by $$8.7{\times }$$8.7× compared to a conventional 7 nm FinFET implementation.
Fichier principal
Vignette du fichier
512096_1_En_13_Chapter.pdf (4.06 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03759735 , version 1 (24-08-2022)

Licence

Paternité

Identifiants

Citer

Edouard Giacomin, Juergen Boemmels, Julien Ryckaert, Francky Catthoor, Pierre-Emmanuel Gaillardon. 3D Nanofabric: Layout Challenges and Solutions for Ultra-scaled Logic Designs. 28th IFIP/IEEE International Conference on Very Large Scale Integration - System on a Chip (VLSI-SoC), Oct 2020, Salt Lake City, UT, United States. pp.279-300, ⟨10.1007/978-3-030-81641-4_13⟩. ⟨hal-03759735⟩
52 Consultations
13 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More